Philips AVENT SCF315, User Manual

Page: 16 / 44

16 EN
Note
•
You do not need to use
all stimulation/expression
levels, only use the levels
that are comfortable for you.
•
Place the pump motor on
a stable and flat surface, to
avoid any accidental drops
when in use. If not, this may
pull the pump body off from
the breast and cause injury.
•
If you regularly express more
than 125ml per session on
each breast, you can use a
260ml/9fl oz Philips Avent
bottle to prevent overfilling
and spillage.
•
If there is no operation on
this appliance (such as
pause, change stimulation
level and expression level)
for 30 minutes (including in
pause), the appliance will
shut down automatically.
7 When you have finished
expressing, press the power
button ( ) to switch off the
breast pump and carefully
remove the pump body from
your breast.
Tip
•
After switching off the
breast pump, break the seal
between the breast and the
pump funnel with your finger,
and then remove the pump
from your breast.
8 Disconnect the the power
plug to the power socket,
and then disconnect the
power adapter from the
pump motor.
1
2
Tip
•
In order to protect the
appliance, please always
shut down the appliance by
pressing the power button
instead of plugging off.
9 Unscrew the bottles from
the pump bodies ready
for feeding/storage. Clean
the other used parts of the
breast pump according to
the instructions in chapter
“
Cleaning and sterilising
”
.
Caution
•
Never tilt the breast pump
when the milk has reached
the maximum line on the
bottle. Replace with a new
bottle before re-pumping to
avoid spillage.
•
After expression, please take
off the bottle from pump
body immediately, then store
the bottle with sealing disc.