Philips AVENT SCD630, User Manual

Page: 8 / 382

- Make sure that you place the baby monitor in such a way that its cord
does not obstruct a doorway or passage. If you place the baby monitor
on a table or low cabinet, do not let the mains cord hang over the edge
of the table or cabinet. Make sure the cord does not lie on the floor
where it presents a tripping hazard.
- Keep the packaging materials (plastic bags, cardboard buffers, etc.) out of
the reach of children, as they are not a toy.
- To prevent electric shock, do not open the housing of the baby unit or
parent unit.
Caution
- Use the appliance at a temperature between 0°C (32°F) and 40°C (104°F).
- Do not install the appliance near any heat sources such as radiators, heat
registers, stoves or other apparatus (including amplifiers) that produce
heat.
- Make sure that your hands are dry when you handle adapters, plugs and
the mains cord.
- All required markings on the baby unit, parent unit
and power adapter
are located on the bottom of the baby unit, parent unit and power
adapter.
Compliance with standards
- This product complies with the radio interference requirements of the
European Community.
- Philips Consumer Lifestyle hereby declares that this baby monitor is in
compliance with the essential requirements and other relevant provisions
of Directive 2014/53/EU (DECT: frequency band 1880-1900 MHz,
maximum radio-frequency power: 250 mW). A copy of the EC Declaration
of Conformity (DoC) is available online at www.philips.com/support.
Electromagnetic fields (EMF)
- This Philips appliance complies with all applicable standards and
regulations regarding exposure to electromagnetic fields.
8
English