To load other feeding items
•
When sterilising other feeding items simply
arrange the components within the rack
ensuring that steam can effectively
circulate in and around all surfaces.
To sterilise
• CHECK THAT YOU HAVE ADDED 200ML OF
WATER.
Failure to add enough water may
cause damage to this product and/or your
microwave. Adding too much water may
mean your items are not properly sterilised.
•
Clip the lid on using the side catches and
place into microwave.
•
See
TABLE A
for microwave wattage
and timings.
•
Do not exceed these times.
• IMPORTANT: WAIT AT LEAST TWO MINUTES
BEFORE REMOVING STERILISER FROM
MICROWAVE. This will complete the
sterilisation cycle and allow the unit to
cool slightly.
•
After the unit has cooled, the lid can
be easily removed by unclipping the
side catches one at a time.
•
After each cycle, drain the excess water
from the unit and rinse to prevent the
build up of limescale.
•
Items will remain sterile in the Steriliser
for up to three hours providing the lid is
not removed.
•
The AVENT Express Microwave Steriliser
is dishwasher safe.
Some products featured may not be available in all
countries. Please contact AVENT to check availability.
AVENT® is here to help
Freephone:
0800 289064
(UK ONLY)
1800 509 021
(IRL ONLY)
1 300 364 474
(AUSTRALIA NATIONAL)
(02) 9457 0127
(AUSTRALIA NSW ONLY)
E-mail:
write:
AVENT, Suffolk, CO10 7QS, England
www.avent.com
For microwaves between 500 – 1850W
UK
ALWAYS ADD 200ML OF WATER
WATTAGE
FULL POWER
COOLING TIME
1100 – 1850W
850 – 1000W
500 – 800W
4 mins
5 mins
8 mins
2 mins
2 mins
2 mins
TABLE A