Please take 5 minutes to read through the
whole of this leaflet before you use your
AVENT Express Bottle and Babyfood
Warmer for the first time and retain for
future reference.
The AVENT Express Bottle and Babyfood
Warmer allows you to warm all AVENT
feeding bottles, as well as baby food jars and
tins, safely and quickly.
The speed at which the Warmer heats the milk
or food will depend on the size of the bottle
or container and the starting temperature of
the milk or food (e.g. room temperature 20 °C
or out of fridge 5 °C). The attached guide
gives an indication of the time you can expect
the Warmer to take. Always test the
temperature of feed before warming.
Hazard Warning
• When in use the Warmer contains hot water.
• Always keep the Warmer and its lead out of
the reach of small children.
• Before plugging in the Warmer for the first
time, ensure the voltage is compatible with
your electricity supply by checking the label
on the base of the unit.
• Always unplug from mains when not in use.
• Always place bottle into Warmer before
adding water.
• Ensure water has been added before
switching the unit on.
• When the feed has reached the required
temperature, remove immediately. If left
in the Warmer, the temperature of the feed
will continue to increase.
•
NEVER IMMERSE IN WATER.
Contents
a) Basket
b) Bottle Warmer body
c) Dial
d) Babyfood container and feeding spoon
Instructions for Use
a) For AVENT Feeding Bottles
1) Ensure basket is in place inside the
Bottle Warmer.
2) Place the assembled, filled bottle in the
Warmer.
3) For 125 ml / 4 oz bottles, fill the Warmer
with water to just above the level of milk
in the bottle.
4) For larger bottles, fill the Warmer to 15
mm (
1
/
2
inch) below the rim of the Warmer.
5) Never let the water level rise above the
neck of the bottle or spill over the edge of
the Warmer.
6) Plug in the unit and switch on at the
mains. Turn the dial to setting 3.
7) The light will illuminate to indicate the
Warmer is working.
8) When the water has reached the correct
temperature, the light will come on and
off to indicate that the water surrounding
the bottle is being kept at a constant
temperature.
9) Always shake the bottle gently and check
the temperature of the milk by sprinkling a
few drops on to your wrist before you feed
your baby. Take care not to overheat the
milk.
NB: The basket can be removed when
heating the AVENT Magic cup and other
makes of bottles.
b) For the AVENT Disposable System
1) Ensure basket is in place inside the Bottle
Warmer.
2) Place the assembled, filled Disposable
Bottle/Nurser in the Warmer.
3) Fill the Warmer with water to the level of
milk in the bottle bag/liner.
4) Plug in the unit and switch on at the
mains. Turn the dial to setting 2 and
continue as 7-9 above. Do not attempt to
heat milk in the Disposable bottle
bags/liners on a higher setting as this could
cause the bags to burst.
5) The Warmer can also be used to warm
breast milk in the AVENT Disposable
System in the same way.
c) For baby food jars and tins:
1) Ensure basket is in place inside the Bottle
Warmer.
2) Remove the lid and place jar or tin in the
Warmer.
3) Fill the Warmer with water to 15 mm
(
1
/
2
inch) below the top of the jar/tin.
4) Turn the dial to setting 3.
5) The Warmer will work in the same way as
for feeding bottles. Take care when
removing the jar or tin as it, and the water
surrounding it, will be hot.
6) Stir the food and test it on a spoon
yourself to ensure it is not too hot for your
baby. Take care not to overheat.
7) For small jars/tins you may find it beneficial
to place a screw ring from an AVENT Bottle
below the jar/tin before adding the water
in order to remove the container easily.
Care of your Bottle Warmer
Unplug and allow to cool before cleaning.
Remove basket and wipe inside and outside
with a damp cloth only, this will keep the
Warmer looking new.
DO NOT USE AN
ABRASIVE CLEANER.
It may be advantageous
to use pre-boiled or filtered water in your
Bottle Warmer in order to reduce limescale
build up.
De-scaling
You should de-scale your AVENT Express Bottle
Warmer every four weeks to ensure it
continues to work 100 % effectively.
EITHER:
Mix one sachet of citric acid (10 gms) with 200
ml / 7 fl.oz. of water. Ensure basket is in place
and pour solution into Warmer. Heat for 10
minutes on setting 3. After 10 minutes, switch
off by unplugging from the wall and leave to
stand for 30 minutes. Pour the solution away
and rinse the Warmer with tap water.
OR
Pour 50 ml / 2 fl.oz. of vinegar (white) mixed
with 100 ml / 4 fl.oz. of cold water into the
Warmer (with basket in place). Allow to stand
in the unit until any limescale has dissolved.
Empty the unit and rinse thoroughly.
WARNING
The AVENT Express Bottle Warmer is fitted
with a non-rewireable moulded plug. In the
event that this plug is unsuitable for the
power sockets in your home it may be cut off
and a suitable replacement fitted. Once
removed, the moulded plug represents an
electrical safety hazard and should be
disposed of carefully. The mains supply cord of
the appliance CANNOT be replaced: if the cord
is damaged, the appliance should be
discarded. This appliance must be earthed.
This product is manufactured to comply with
the Radio Interference Requirements and the
EEC Directive 89/336/EEC.
Guarantee
Cannon AVENT guarantees that should the
Express Bottle Warmer become faulty during
twelve months from the date of purchase, it
will be replaced free of charge during this
time. Please return it to the retailer where it
was purchased. Please keep your receipt as a
proof of purchase, together with a note of
when and where purchased. For the
guarantee to be valid, please note:
• The Warmer must be used according to the
instructions in this leaflet and connected to
a suitable electricity supply.
• The claim must not be a result of accident,
misuse, dirt, neglect or fair wear and tear.
AVENT
®
is here to help
Freephone: 0800 289064
(UK ONLY)
1800 509021
(IRL ONLY)
1 300 364 474
(AUSTRALIA OUTSIDE NSW ONLY),
(02) 9457 0000
(AUSTRALIA WITHIN NSW ONLY)
E-mail: [email protected]
write: AVENT, Suffolk, CO10 7QS, England
www.avent.com
AVENT America
Toll free: 1-800-54-AVENT
write: 475 Supreme Drive, Bensenville,
IL 60106 USA
www.aventamerica.com
AVENT Express Bottle and Babyfood Warmer
Summary of Contents for EXPRESS BOTTLE AND BABYFOOD WARMER
Page 2: ......
