Philips AVENT Breast Pump, Manual

Page: 4 / 42

2
GB
2. Detailed parts guide
MANUAL BREAST PUMP
a) Funnel cover (same as i)
b) Let-down Massage Cushion
c) Pump cover
d) Silicone diaphragm
and stem*
e) Handle
f) Pump body
g) White valve*
3. Cleaning and sterilisation
Before you use your breast pump for the first time and every time
before use:
Separate all parts, then wash in the dishwasher or in warm soapy water
and rinse. Do not use antibacterial or abrasive cleaners/detergents.
Caution: Take care when cleaning the white valve.
If it gets damaged, your breast pump will not function
properly. To clean the white valve, rub it gently
between your fingers in warm soapy water. Do not
insert objects as this may cause damage.
Sterilise all parts in a Philips AVENT steam steriliser or by boiling
for 5 minutes. If using a Philips AVENT steam steriliser, the pump
will remain sterile in the steriliser for a minimum of 6 hours,
provided the lid is not removed.
4. Keeping your breast pump sterile for travel
After sterilising all parts, insert the white valve (g) and
fit the diaphragm with stem (d) onto the pump body (f).
Clip the cover (a) over the funnel and Let-down Massage
Cushion (b) and screw on the sealing base (m) in place of
the Philips AVENT feeding bottle (h).
BOTTLE
h) Philips AVENT feeding bottle (125ml/4oz) /
VIA adaptor/ VIA cup / adaptor ring
i) Stand (same as a) / VIA lid / stand
j) Dome cap
k) Extra Soft teat, Newborn Flow (0m+)
l) Screw ring
m) Sealing base
n) Sealing disc
*spares included