10
VII. Z-Wave
TM
Message Report
When you lock or unlock the door, the device will report the door lock
status as an event to the controller.
* Door Lock Status Report:
When you lock or unlock the door, the device will unsolicited to send
the report to the nodes in the group 1.
Door Lock Operation Report (V2)
Unlock
Current Door Lock Mode: Door Unsecured=00
Lock
Current Door Lock Mode: Door Secured=FF
VIII. Over the Air Firmware Update
The device supports the Z-Wave firmware update via OTA.
Let the Z-Wave
TM
Controller into the firmware update mode, chose the
hex file to update. Wait for 10~15 minutes.
At that time,
please don't remove the battery
, otherwise it will
cause the firmware to be broken, and the device will not function.
Result will show in Z-Wave
TM
Controller log.
IX. Security Network
The device supports the security function. When the device is included
with a security controller, the device will auto switch to the security
mode. In the security mode, the follow commands need to use Security
CC wrapped to communicate, otherwise it will not response.
COMMAND_CLASS_VERSION,
COMMAND_CLASS_DOOR_LOCK,
COMMAND_CLASS_USER_CODE,
COMMAND_CLASS_ASSOCIATION_V2,
COMMAND_CLASS_ASSOCIATION_GRP_INFO
COMMAND_CLASS_FIRMWARE_UPDATE_MD_V2
X. Z-Wave Supported Command Class
COMMAND_CLASS_ZWAVEPLUS_INFO,
COMMAND_CLASS_MANUFACTURER_SPECIFIC,
COMMAND_CLASS_SECURITY,
COMMAND_CLASS_DEVICE_RESET_LOCALLY,
COMMAND_CLASS_BATTERY,
COMMAND_CLASS_POWERLEVEL
COMMAND_CLASS_VERSION,
COMMAND_CLASS_DOOR_LOCK,
COMMAND_CLASS_USER_CODE,
COMMAND_CLASS_ASSOCIATION_V2,
COMMAND_CLASS_ASSOCIATION_GRP_INFO
COMMAND_CLASS_FIRMWARE_UPDATE_MD_V2