If you experience problems setting up your
amplifier, please call the Philex Customer Care Line:
08457 573 479
- (Local Rate UK only).
Alternatively, please visit our technical website at
www.philex.com/support
Waste electrical and electronic
products should not be disposed of
with household waste. Please recycle
where facilities exist. Check with your
Local Authority for recycling advice.
If you are experience reception problems after
installing the SLxB, please see below:
No picture or sound
No signal is reaching your television due to a
possible break in the aerial signal path. Ensure that
all equipment has been switched on (including the
SLxB amplifier) and that all coaxial connectors have
been fitted correctly.
Problems with Digital TV Reception
It is not possible to view digital terrestrial TV
channels under weak signal strength conditions.
Therefore, typically you will either receive DTT
channels with a clear picture and sound or you will
not receive any channels at all.
A weak digital signal can cause occasional blocking,
freezing or complete loss of picture. Ensure that your
aerial is a wideband, high gain aerial suitable for
DTT reception. Blocking, freezing or complete loss of
picture can also occur when the signal is too strong.
If the signal is still too strong, fit a signal attenuator
between the aerial downlead and DTT receiver to
reduce the signal strength.
For specific help with digital TV reception problems,
visit www.dtg.org.uk
Problems with satellite television
If you are experiencing any problems with your
satellite television picture, check that all cables
and connectors have been fitted correctly. If the
problem persists it is probably due to the dish
alignment or a temporary problem with the channel
transmissions. Please contact your local satellite
dealer if the problem persists.
Technical Support
Troubleshooting
Inputs Outputs UHF Freq. VHF Freq. Max output Gain per port Noise Isolation Loss Weight
Dim. mm
1
2
470-790MHz 47-230MHz 94dBµV
6dB
≤4dB
22dB
330g
130 x 75 x 45
Specifications
Wall Mounting Drilling Template
© Philex Electronic Ltd 2013. v1 www.philex.com
SLx2B
Prepare holes 60mm apart
for wall mounting