background image

1.   Connect your UHF aerial downlead to the aerial 

input on your Satellite Receiver and connect your 
FM aerial downlead (if applicable) to the IN FM 
socket on the SLxG.

2.   Connect an aerial fly-lead from the RF2 output 

on the Satellite Receiver to the ANT input on the 
amplifier.

3.   Connect your TVs and FM tuners to any of the 

SLxG TV sockets in any combination.  
Once connected, you can tune each television 
to digital terrestrial channels* and a channel for 
satellite viewing.

Note. Only one satellite channel can be viewed at 
any one time without the use of additional satellite 
receivers and subscriptions.

Note. To operate your digital satellite receiver from 
one of the connected TVs you will now need to 
install a Link device such as the SLx Link.

Note. To view digital terrestrial channels an aerial 
must be connected to the Aerial IN socket on the 
satellite. Also connected TVs must have a built-in 
Freeview™ receiver or be connected to the amplifier  
via a Freeview™ set top box. 

Signal distribution from a Satelllite Receiver

Please Note: To receive output from the satellite RF2 output you will need a TV with an analogue tuner.

Aerial IN

TV

Aerial

Note: Digi-Link and 

Leads shown 

are not Supplied

TVs with built-in

Freeview™ Receivers

MAIN

TV

DAB

Aerial

DAB Radio/Tuner

RF1

RF2

Dish IN

TV

TV

Digi-Link

Digi-Eye

Satellite

Dish

Satellite Receiver

HDMI/SCART

connection

TV

TV

UHF

1

2

3

4

FM

DAB

POWER

SHORT CIRCUIT PROTECTION

REMOTE EYE 

 8x

DISTRIBUTION AMP

Digital Compatible

1

2

3

4

5

6

7

8

TV

TV

TV

Reviews: