background image

If you experience problems setting up your 
amplifier, please call the Philex Customer Care Line: 

08457 573 479

 - (Local Rate UK only). 

Alternatively, please visit our technical website at  
www.philex.com/support 

Waste electrical and electronic 

products should not be disposed of 

with household waste. Please recycle 

where facilities exist. Check with your 

Local Authority for recycling advice.

If you are experience reception problems after 
installing the SLxB, please see below:

No picture or sound

No signal is reaching your television due to a 

possible break in the aerial signal path. Ensure that 

all equipment has been switched on (including the 

SLxB amplifier) and that all coaxial connectors have 

been fitted correctly.

Problems with Digital TV Reception

Unlike analogue terrestrial television, it is not 

possible to view DTT channel under weak signal 

strength conditions. Therefore, typically you will 

either receive DTT channels with a clear picture and 

sound or you will not receive any channels at all.
A weak digital signal can cause occasional blocking, 

freezing or complete loss of picture. Ensure that your 

aerial is a wideband, high gain aerial suitable for 
DTT reception. Blocking, freezing or complete loss of 
picture can also occur when the signal is too strong.

If the signal is still too strong, fit a signal attenuator 
between the aerial downlead and DTT receiver to 
reduce the signal strength.

For specific help with digital TV reception problems, 
visit www.dtg.org.uk

Problems with satellite television

If you are experiencing any problems with your 
satellite television picture, check that all cables 
and connectors have been fitted correctly. If the 
problem persists it is probably due to the dish 
alignment or a temporary problem with the channel 
transmissions. Please contact your local satellite 
dealer if the problem persists.

Technical Support

Troubleshooting

Inputs Outputs UHF  Freq.  VHF  Freq.  Max output Gain per port Noise Isolation Loss Weight

Dim. mm

2

6

470-790MHz 30-300MHz 87dBµV

6dB

≤4dB

23dB

785g

270 x 90 x 46

Specifications

Wall Mounting Drilling Template

© Philex Electronic Ltd 2013. v1       www.philex.com

Prepare holes 123 mm apart for wall mounting

Summary of Contents for 27823BMG

Page 1: ...xB amplifiers have an integrated by pass designed to allow the user to control digital satellite receivers from a second TV without additional equipment apart fron a Link device and a digital satellite or compatible universal remote control Please Note To view output from the satellite RF2 output you will need a TV with an analogue tuner For added safety the SLxB series has built in short circuit ...

Page 2: ...ket and connect your FM DAB aerial downlead if applicable to the IN FM socket on the amplifier 2 Connect your TVs and FM tuners to any of the SLxB TV sockets in any combination If your TV does not have a built in Freeview receiver you will need to connect your TV to the amplifier via a Freeview set top box ...

Page 3: ...te viewing Note Only one satellite channel can be viewed at any one time without the use of additional satellite receivers and subscriptions Note To operate your digital satellite receiver from one of the connected TVs you will now need to install a Link device such as the SLx Link Note To view digital terrestrial channels an aerial must be connected to the Aerial IN socket on the satellite Also c...

Page 4: ...y channels at all A weak digital signal can cause occasional blocking freezing or complete loss of picture Ensure that your aerial is a wideband high gain aerial suitable for DTT reception Blocking freezing or complete loss of picture can also occur when the signal is too strong If the signal is still too strong fit a signal attenuator between the aerial downlead and DTT receiver to reduce the sig...

Reviews: