Philex 27820HSG User Manual Download Page 2

Page: 2 / 4

Installing your amplifier

Aerial signal distribution

1. Connect your UHF aerial downlead to the IN

UHF socket and connect your FM/DAB aerial
downlead (if applicable) to the IN FM socket on
the amplifier.

2. Connect your TVs and FM tuners to any of the

SLx4 TV sockets in any combination.

  If your TV does not have a built-in Freeview™
  receiver you will need to connect your TV to the
  amplifier via a Freeview™ set top box.

ANT IN

Aerial

Note: Leads shown

are not Supplied

TVs with built-in

Freeview™ Receivers

Freeview™

Receiver/PVR

DAB

Aerial

DAB Radio/Tuner

Summary of Contents for 27820HSG

Page 1: ...nd Sky Sky signals around the home Please Note To view output from the satellite RF2 output you will need a TV with an analogue tuner The SLx4 is not equipped with a digital bypass and is not compatib...

Page 2: ...ket on the amplifier 2 Connect your TVs and FM tuners to any of the SLx4 TV sockets in any combination If your TV does not have a built in Freeview receiver you will need to connect your TV to the amp...

Page 3: ...mplifier is present and so will not output 12V Short circuit protection For added safety the SLx4 has built in short circuit protection Should a short circuit be detected the amplifier will shut down...

Page 4: ...nal blocking freezing or complete loss of picture Ensure that your aerial is a wideband high gain aerial suitable for DTT reception Blocking freezing or complete loss of picture can also occur when th...