EN - 22
09/2013
Copyright © 2013, Fast ČR, a. s.
PART 9: AUTOMATIC MALFUNCTION DETECTION
SYSTEM
Your washing machine is equipped with a system, which during the washing process continually monitors the
correct progress and in the case of any malfunction takes the necessary remedy measures and will at the same
time inform you about the malfunction.
Error code
Error indicator
Possible cause
Solution
E01
Start/Pause indicator
light is fl ashing.
The door is open.
Check whether the door is properly
closed. If the problem persists, turn
off the washing machine, disconnect
the power cord from the mains socket
outlet and contact an authorised servi-
ce centre.
Err 02
Program indicator light
is fl ashing
There is not very much
water in the drum.
Water pressure is too
low.
Completely open the tap. There may
be a water outage. If the problem
persists, turn off the washing machine,
disconnect the power cord from the
mains socket outlet and contact an
authorised service centre.
Err 03
The Start/Pause and
program indicator
lights are fl ashing.
The pump is damaged
or the pump fi lter is
clogged.
Clean out the pump fi lter. If the pro-
blem persists, turn off the washing ma-
chine, disconnect the power cord from
the mains socket outlet and contact an
authorised service centre. (*)
Err 04
The end of program in-
dicator light is fl ashing.
Communications pro-
blem.
If the problem persists, turn off the wa-
shing machine, disconnect the power
cord from the mains socket outlet and
contact an authorised service centre.
(*) Check the information contained in chapter "MAINTENANCE AND CLEANING".
