Philco PW3708N, Manual

Page: 8 / 24

8 - EN
Auxiliary functions
Auxiliary function selection keys
Select the required auxiliary functions before
starting the program.
Auxiliary function buttons may differ
according to the model of your machine.
Auxiliary function selection
If an auxiliary function that should not be
selected together with a previously selected
function is chosen, the first selected function
will be cancelled and the last auxiliary function
selection will remain active.
For example: If you want to select pre-wash
first and then quick wash, pre-wash will be
cancelled and quick wash will remain active.
Auxiliary function that is not compatible
with the program cannot be selected. (see
“Program Selection Table”)
Ř5LQVH+ROG
If you do not want to unload your clothes
immediately after the cotton, synthetics,
woolen and delicate fabrics program, you
may release your clothes inside the machine
in the last rinsing water by pressing the rinse
hold button in order to prevent your clothes
become wrinkled. After this process you may
spin your laundry by pressing “Start/Pause/
Cancel ” butto n or you may end the program
by pressing “Start/Pause/Cancel” button for
3 sec.
In the machines equipped w ith spin speed Ř
selection knob or button, you can spin by
selecting the desired spin speed and press
“Start/Pause/Cancel” button.
Ř As for machines not equipped with a spin
speed selection knob, you can end the
program without a spin cycle by pressing
the “Start/Pause/Cancel” button and
draining the water. If you wish your clothes
be spun, you can spin them by selecting
“pump+spin” program.
Ř1R6SLQ
You may use this program if you do not want
to spin your clothes at the end of cottons,
synthetics, woolen or delicate programs.
6WDUWLQJWKH3URJUDPPH
3URJUHVVLQJDSURJUDPPH
Progress of a running program is shown through the
program follow-up indicator. At the beginning of every
program step, the relevant indicator lamp will light up
and light of the completed step will turn off.
If the machine is not spinning, the program may be
in rinse hold mode or the automatic spin correction
system has been activated because of excessive
unbalanced distribution of laundry in the machine.
&KDQJLQJWKHVHOHFWLRQVDIWHUWKHSURJUDPPH
KDVVWDUWHG
Ř4XLFN
This function can be used in Cottons and
Synthetics programmes. It decreases the
washing times and also the number of
rinsing steps for lightly soiled laundry.
Ř3UHZDVK
A pre-wash is only worthwhile for heavily
soiled laundry. Without pre-wash you save
energy, water, detergent and time. Pre-wash
without detergent is recommended for lace
and curtains.
1.
Press Start / Pause button to start the programme.
2. Programme follow-up light showing the startup of the
programme will turn on.
If no programme is started or no key is pressed within
1minute during programme selection process, the
machine will switch to Pause mode and the illumination
indicators will turn off.Once the Programme Selection
lights and indicators will turn on again.
level of the temperature,speed and loading door
indicator lights will decrease.Other indicator lights and
knob is rotated or any button is pressed, indicator
6ZLWFKLQJWKHPDFKLQHWRSDXVHPRGH
Press the Start / Pause button to switch the machine to
pause mode while a programme is running. The light
of the step which the machine is in starts flashing in
the Programme Follow-up indicator to show that the
machine has been switched to the pause mode.
Also, when the loading door is ready to be opened,
Loading Door light will also illuminate continuously in
addition to the programme step light.
Delaye G 6 tart
With the Delayed Start function the startup of
the
p
rogramme may be delayed up to 19 hours.
Delayed start time can be increased by increments
of 1 hour.
Do not use liquid detergents when you set
Delayed Start! There is the risk of staining of
the clothes.
1. Open the loading door,place the laundry and put
detergent. etc.
2. Select the washing programme, temperature, spin
speed and , if required, the auxiliary functions.
3. Set the desired time by pressing the Delayed Start
button.
4. Press Start /Pause button, the delayed start time
you have set is displayed, Delayed start countdown.
“-”symbol next to delayed start time moves up
and down on the display.
Additional laundry may be loaded during the
delayed strat period
At the end of the countdown, duration of the selected
programme will be displayed. “-”symbol will disappear
and the selected programme will start.
Ř5LQVH
This function enables the machine to make
another rinsing in addition to the one already
made after the main wash. Thus, the risk for
sensitive skins (babies, allergic skins, etc.) to
be effected by the minimal detergent
remnants on the laundry can be reduced.