Philco PTL 1061, User Manual

Page: 10 / 56

EN - 8
05/2012 Copyright © 2012, Fast ČR, a. s.
CLEANING BEFORE USE
Check that you have removed from the appliance all adhesive tape used to hold accessories . Then clean all the
inside parts using lukewarm water with a neutral cleaning agent, vinegar or sodium carbonate – in this way
you will remove the characteristic odour of new parts – then dry carefully. Do not use detergents or aggressive
agents, which could damage the surfaces.
ELECTRICAL CONNECTION
Before connecting the power plug to the power socket, check that:

Your hands are completely dry.

The voltage and frequency shown on the rating label of the appliance corresponds to that in the home
power grid (permitted tolerance from -6% to +6% for nominal voltage. For use with diff erent voltages, use
a voltage changer with the corresponding parameters).

The cord and the plug are not damaged or caught under heavy objects.

The power cord is not excessively tensioned, it is not permitted to use an extension cord.
Do not connect the appliance to a voltage rectifi er (e.g. solar power plant) or use an extension cord.
The appliance must be connected to a working grounding lead.
If the power socket of the home system is not grounded in accordance with the current legal
regulations, connect the appliance after consulting a specialised technician to the grounding lead
itself.
The manufacturer takes no responsibility for injuries caused as a result of not following these
instructions.
If you do not correctly level the refrigerator during the installation, the door may not close shut and
seal properly, which may cause problems with the cooling, or moisture. Levelling the refrigerator
is very important.
Level the refrigerator using the adjustable feet – turn them clockwise to lift the refrigerator and turn them
anticlockwise to lower the refrigerator.
CHANGING THE DOOR OPENING DIRECTION
If you need to change the door opening direction, contact an authorised service centre.