Philco PTB 91 FW, Owner'S Manual

Page: 12 / 156

Copyright © 2019, Fast ČR, a. s. Revision 09/2021
EN - 10
INSTALLATION
IMPORTANT!
●
FOR ELECTRICAL CONNECTION CAREFULLY, FOLLOW THE
INSTRUCTIONS GIVEN IN THIS MANUAL. UNPACK THE APPLIANCE
AND CHECK IF THERE ARE DAMAGES ON IT.
●
DO NOT CONNECT THE APPLIANCE IF IT IS DAMAGED. REPORT
POSSIBLE DAMAGES IMMEDIATELY TO THE PLACE YOU BOUGHT
IT. IN THIS CASE RETAIN PACKING.
●
IT IS ADVISABLE TO WAIT AT LEAST FOUR HOURS BEFORE
CONNECTING THE APPLIANCE TO ALLOW THE OIL TO FLOW BACK
IN THE COMPRESSOR.
●
ADEQUATE AIR CIRCULATION SHOULD BE AROUND THE
APPLIANCE, LACKING THIS LEADS TO OVERHEATING. TO
ACHIEVE SUFFICIENT VENTILATION, FOLLOW THE INSTRUCTIONS
RELEVANT TO INSTALLATION.
●
WHEREVER POSSIBLE THE BACK OF THE PRODUCT SHOULD
NOT BE TOO CLOSE TO A WALL TO AVOID TOUCHING OR
CATCHING WARM PARTS (COMPRESSOR, CONDENSER) TO
PREVENT THE RISK OF A FIRE, FOLLOW THE INSTRUCTIONS
RELEVANT TO INSTALLATION.
●
THE APPLIANCE MUST NOT BE LOCATE CLOSE TO RADIATORS
OR COOKERS.
●
MAKE SURE THAT THE MAINS PLUG IS ACCESSIBLE AFTER THE
INSTALLATION OF THE APPLIANCE.
●
PLACE ALL PACKAGING MATERIALS OUT OF THE REACH OF
CHILDREN, THERE IS A RISK OF SUFFOCATION.