Philco PMD 178 BIX, Owner'S Manual, Page: 13 / 78

Copyright © 2020, Fast ČR, a. s. Revision 03/2020
EN - 11
PART 3: INSTALLATION INSTRUCTIONS
Please Read the Manual Carefully Before Installation.
Please note
Electrical connection
The oven is fitted with a plug and must only be connected to a properly installed earthed socket. The socket
must only be installed and the connecting cable must only be replaced by a qualified electrician, and in
accordance with the appropriate regulations. If the plug is no longer accessible following installation, an all-
pole isolating switch must be present on the installation side with a contact gap of at least 3 mm.
The fitted cabinet must not have a back wall behind the appliance.
A gap must be maintained between the wall and the base of the unit above.
Specific gap size could be referenced by the diagrams.
Minimum installation height: 85 cm
Do not cover ventilation slots and suction holes.
Note:
Do not trap or bend the power cable.
Screw
Screw
Mounting plate
Trim-kit plastic cover