EN - 6
08/2014
Copyright © 2014, Fast ČR, a. s.
PART 3: INSTALLATION
Remove the oven from the box and and all materials from the oven cavity. The oven comes complete with the
following accessories:
Glass tray
Turntable ring assembly
Instruction manual
Grill rack
Installing the turntable
Hub (underside)
Glass tray
Turntable ring
assembly
Turntable shaft
Never position the glass tray upside down. Glass tray movement should never be obstructed.
Always use both the glass tray and turntable ring assembly during cooking.
All food and food containers should always be placed on the glass tray during cooking.
If the glass tray or turntable ring assembly cracks or breaks, contact your local authorised support centre.
Installation and connection
1. This appliance is only intended for domestic use.
2. This oven is intended for built-in use only. It is not intended for counter-top use or for use inside a cupboard.
3. Please observe the special installation instructions.
4. The appliance can be installed in a 60cm wide wall-mounted cupboard(at lease 55cm deep and 85cm
off the fl oor).
5. The appliance is fi tted with a plug and must only be connected to a properly installed earthed socket.
6. The mains voltage must correspond to the voltage specifi ed on the rating plate.
7. The socket must be installed and connecting cable must only be replaced by a qualifi ed electrician. If the
plug is no longer to accessible following installation, an all-pole disconnecting device must be present
on the installation side with a contact gap of at lease 3mm.
8. Adapters, multi-way strips and extension leads must not be used. Overloading can result in a risk of fi re.