Philco PM2024, Service Manual, Page: 9 / 26

-9-
Service Adjustments
No. Item Initial value Range Description
01 RFAGC 06 00~63 RF AGC adjustment
02 H-PHA 08 00~31 H-PHASE adjustment (50Hz)
03 V-POS 32 00~63 Vertical position adjustment (50Hz)
04 V-SIZ 54 00~127 Vertical size adjustment (50Hz)
05 V-SCO 17 00~31 Vertical-S compensation (50Hz)
06 VLIN 15 00~31 Vertical linearity adjustment (50Hz)
07 H-P60 +4 -16~+15 Difference value of H-PHASE adjustment (60Hz)
08 V-P60 0 -32~+31 Difference value of V-POSITION adjustment (60Hz)
09 V-S60 +1 -64~+63 Difference value of V-SIZE adjustment (60Hz)
10 VSC60 0 -16~+15 Difference value of Vertical-S compensation (60Hz)
11 VLI60 +1 -16~+15 Difference value of Vertical linearity adjustment (60Hz)
12 OSDHP 30 01~255 OSD horizontal remark position
13 OSDC 50 00~127 OSD contrast
14 V-SCP 07 00~07 V-SIZE COMP (50Hz)
15 SBIAS 70 00~127 Sub Bias adjustment
16 RBIAS 00 00~255 Red Bias adjustment
17 GBIAS 00 00~255 Green Bias adjustment
18 BBIAS 00 00~255 Blue Bias adjustment
19 RDRIV 63 00~127 Red Drive adjustment
20 GDRIV 07 00~15 Green Drive adjustment
21 BDRIV 63 00~127 Blue Drive adjustment
22 - - - - - - White balance (a lateral line)
23 DRV - - - - Brightness and dark of White balance adjustment
24 B-YD 10 00~15 B-Y DC Level
25 R-YD 10 00~15 R-Y DC Level
26 B-YND 0 -16~+15 Difference value of NTSC B-Y DC Level
27 R-YND 0 -16~+15 Difference value of NTSC R-Y DC Level
28 G-YA 00 00,01 G-Y Angle
29 RBGB 08 00~15 R-Y/B-Y Gain Balance
30 RBAG 08 00~15 R-Y/B-Y Angle
31 G-YAN 00 00,01 Difference value of NTSC G-Y Angle
32 RBGBN 0 -8~+7 Difference value of NTSC R-Y/B-Y Gain Balance
33 RBABN 0 -8~+7 Difference value of NTSC R-Y/B-Y Angle
34 COGV 01 00~03 Coring gain
35 BLK 03 00~03 BLK. STR. Start (W/Defeat)
36 BLKG 03 00~03 BLK. STR. Gain
37 BRTA 00 00, 01 BRT. ABL Defeat
38 BRST 00 00, 01 Mid. Stp. Defeat
39 BRTH 00 00~07 Bright. ABL. Threshold
40 WPL 00 00~03 WPL Ope. Point (W/Defeat)
41 YGAM 00 00~03 Y Gamma Start
42 PORW 00 00, 01 AV Mode Pre/Over SW
43 PORS 02 00~03 AV Mode Pre/Over-shoot adjustment
44 RFCO 0 00~03 Difference Value of RF Corring Gain
45 PORWN 01 00, 01 RF Pre/Over SW
46 PORSN 03 00~03 RF Pre/Over-shoot adjustment
47 TINT 0 -16~+15 Tint
48 SHRF 0 -16~+15 Difference Value of RF Sharpness
49 TEXC 08 00~127 OSD Text Contrast
50 AUFL 00 00, 01 Auto. Fresh
On-screen Service Menu
Following table shows the initial values which have been stored in the CPU ROM, and items for the service
adjustments.
To be continued.