Philco PLS 1051 F, User Manual

Page: 18 / 88

EN - 16
05/2013 Copyright © 2013, Fast ČR, a. s.
Cancelling a program
Cancelling a program that is currently running
Turn the program selection dial to the 0 position.
The washing machine will stop and the program will be cancelled.
To drain the water, turn the program selection dial to any position.
The water will be drained automatically.
Now you can select a new program.
End of a program
The selected program will be ended automatically after the last stage.
The end of program indicator light will start fl ashing on the display.
Move the program selection dial to the 0 position.
Pull the power cord out of the power socket.
Shut off the water inlet.
Open the drum door and take the laundry out.
After completing the wash, leave the door of the washing machine open so that the water remaining in the
drum can dry out.
Important
You will only be able to open the door after 2 minutes because they will be blocked. This time is not
included in the total washing cycle time.
Child Safety Lock
The child safety lock function serves to block the washing machine controls and prevent an unauthorised
change to the program or the washing machine's settings.
Press and hold down simultaneously the additional function buttons 1 and 2 for approximately 3 seconds. The
indicator light of the child safety lock will be lit.
If you press any button while the child safety lock is activated, a padlock symbol will appear on the display for
a moment.
An activated child safety lock enables the restart of a program if it was interrupted by the program selection
dial being turned to the 0 position.
To deactivate the child safety lock, press and hold down simultaneously the additional function buttons 1 and
2 for approximately 3 seconds. The indicator light of the child safety lock will be lit for a moment.