Philco PLD 1271, User Manual

Page: 26 / 96

EN - 24
04
/201
2
Copyright © 2011, Fast ČR, a. s.
SECTION 8: AUTOMATIC FAILURE DETECTION SYSTEM
Your machine is equipped with systems which will both take the necessary precautions and warn you in case
of any failure by controlling it self constantly during the washing processes.
FAILURE CODE PROBABLE FAILURE THE PROCESS TO BE DONE
The door is not shut properly.
Shut the door properly so that
you hear the click. If the problem
persists, turn off the machine
unplug and apply to the nearest
authorized service immediately.
The water level in your machine
is below heater. The pressure of
your water supply may be low or
locking.
Turn on the tap to the end. Water
may be cut, check it.If the problem
is still continuing,your machine
will automatically stop after
a while. Unplug your machine,
turn off the tap and apply to the
nearest authorized service.
The pump has failed or the pump
fi lter is obstructed.
Clean the pump fi lter.If the
problem persists,apply to the
nearest authorized service.(*)
There is an excessive amount of
water in your machine.
Your machine will automatically
drain the water. After your ma-
chine has completed the draining
process,shut down your machine
and unplug. Close the tap and
apply to the nearest authorized
service.
(*) See the section regarding the maintenance and cleaning of your machine.