Philco PHWK 1700, User Manual

Page: 7 / 64

Copyright © 2019, Fast ČR, a. s. Revision 05/2019 5
EN
■
When filling the kettle, make sure that the water
level covers at least the minimum mark and also that
it does no go over the maximum mark. If the kettle
is overfilled, then boiling water could splash out.
■
Take care not to spill water on to the connector
when placing the kettle on to the base and when
taking it off the base.
■
Check that the lid is securely closed before starting
the kettle. Do not open the lid or handle it in any
way while the water is boiling.
■
The surface of the heating element and kettle body
remains hot after use due to residual heat. Do not
touch the hot surface. Use the handle for lifting and
carrying the kettle.
■
Be especially careful when pouring water out of
the kettle to avoid scalding by the boiling water or
steam.
■
Always disconnect the kettle from the power socket
when leaving it without supervision, when not using
it and before moving or cleaning it.
■
Clean it according to the instructions in chapter
Cleaning and maintenance.