Philco PHD 6415R, User Manual, Page: 10 / 64

EN - 8
04/2014 Copyright © 2014, Fast ČR, a. s.
Stopping the cooking time
On the power selection zone select a hotplate for which you wish to cancel the timer. The remaining time will
be shown on the display. Press the button, the remaining time will be shown again. To end the timer, press
the button until "00" appears on the display.
Automatic shut off after the cooking time has elapsed
"00" will start fl ashing on the display and a sound will be made as soon as the timer duration is complete. To
cancel the sound signal, press the button.
Minute timer
Turn on the cooktop. Press the button to select a timer and "00" will appear on the display. Press the
button again and set the timer in 10-minute increments (10, 20, 30), then using your fi nger, set the timer in
1-minute increments on the power selection zone (31, 32, 33).
The time is confi rmed and the countdown will be started.
Automatic cooking
All hotplates are equipped with the automatic cooking function. The selected hotplate will start cooking at full
power for a certain time and then automatically reduce the power to a preset power level.
To set the power level, slide your fi nger along the power selection zone until "7" appears on the display. Hold
for approximately 3 seconds. Then "7" and "A" will fl ash.
To turn off the function, move your fi nger along the power selection zone from 0 to 9.
Pause function
This function makes it possible to temporarily turn off a hotplate and to turn it on again to the initial setting.
To turn on the function, press the II button for approximately 3 seconds. The display will show II. To turn off
the function, press the II button for approximately 3 seconds and use the power selection zone. The previous
setting will appear.
Memory
After turning off the cooktop using the 0/I button, it is possible to renew the last setting, i.e.:
-
settings of all hotplates;
- minutes and seconds of timers on selected hotplates;
- automatic cooking;
- keep warm function.
To renew the last settings, turn on the cooktop using the 0/I button and then press the II button before the
indicator light stops fl ashing. The last settings will be renewed.