Philco PHD 327, User Manual

Page: 16 / 60

EN - 14
06/2012 Copyright © 2012, Fast ČR, a. s.
Apply single sided adhesive tape around the bottom edge of the cooktop, the tape is specially designed for
cooktops. Do not over stretch the tape.
Attach 4 mounting brackets into the side parts of the appliance.

Insert the cooktop into the cut-out hole in the workbench.

To ensure cooling, before inserting the oven, it is necessary to remove the rear kitchen panel in the location
where the oven is opened. The front part of the kitchen part must have a hole no smaller than 5 mm.
ATTENTION:
Under no condition should you glue this induction cooktop!