4
Revison 07/2018
Copyright © 2018, Fast ČR, a. s.
EN
PART 2: BEFORE THE FIRST USE
To ensure the fi rst cup of coffee tastes excellent, you should rinse the coffee maker with warm water as
follows:
1.
Pour 1200ml water into water tank.
2. Set nylon fi lter in funnel (add no coffee ground), then cover up water tank cover.
3. Place drip carafe on keeping warm plate.
4. Connect to power source, “:” will show on display.
5. Press any key,12:00 will show on display.
6. Press ON/OFF button once, the red indicator is illuminated, coffee will drop out automatically after
a while. After a few seconds, press ON/OFF button again, the blue indicator is illuminated, enter auto
preparation turn on state. The blue lamp off and red lamp on, the unit enter making coffee state, it will be
automatically shut off after 2 minutes after the brewing fi nished. Press ON/OFF button thrice again the
red indicator goes out and the coffee maker stops working.
7. After water not dropping out any more, you can pour the water in each container out then clean them
thoroughly, now you can start brewing.
MAKE DRIP COFFEE
1. Open the water tank cover, pour proper drinking water into water tank according to the mark in the tank.
2. Add ground coffee to nylon fi lter with measuring spoon, a spoon ground coffee powder can make a cup of
top-grade coffee, but you can adjust according to the taste yourself.
3. Cover up water tank cover, then connect the appliance to power supply source, the display will show “:”.
4. Set nylon mesh into funnel.
5. Push drip carafe on keeping warm plate, pay attention to let center line of carafe aligns with that of
funnel.
6. Press any key, the display will show 12:00.Press down ON/OFF button once, the red indicator is
illuminated, coffee will drop out automatically after a while. Note: at any time, you can take out carafe
to serve but the time cannot exceed 30 seconds, otherwise the coffee may overfl ow from the edge of
funnel.
