Philco PFTM26SI, Instruction Manual

Page: 24 / 39

Tools you will need
6
Stand your refrigerator in a dry place
to avoid high moisture.
Keep the refrigerator out of direct
sunlight rain or frost.
Stand the refrigerator away from
heat sources such as stoves,
fi
res or
heaters.
Leveling of refrigerator
For sufficient leveling and air
circulating in the lower rear section of
the refrigerator, the bottom feet may
need to be adjusted.
You can adjust them manually by
hand or by using a suitable spanner.
To allow the doors to selfclose, tilt the
top backwards by about 10mm.
Reversing the door
The side at which the door opens
can be changed, from the right side
(as supplied) to the left side, if the
installation site requires.
Warning! When reversing the door,
the refrigerator must not be connected
to the mains. Ensure that the plug is
removed from the mains socket.
Note: Before you start lay the
refrigerator on its back in order to
gain access to the base you should
rest it on soft foam packaging or
similar material to avoid damaging
the backboard of the refrigerator. To
reverse the door the following steps
are generally recommended.
1. Stand the refrigerator upright. Open
the upper door to take out all door
racks (to avoid racks damaged) and
then close the door.
●
●
●
●