Philco PF 2272, Owner'S Manual

Page: 20 / 142

Copyright © 2020, Fast ČR, a. s. Revision 12/2021
EN - 18
7. Rotate the holder
(6)
together with the washers at the axis and the plastic spacer by 180°. Remove the
axis and the washers and attach them again to the other side of the holder. As soon as the holder (6) is
attached to the door, attach it to the upper holes at the other side of the refrigerator.
8. Cover the holder and the remaining area using the covers (c) .
9. Remove the screw covers (a) and the plugs (b) . Remove the screws that hold the handles in place. Place
the handles to the other side and screw them in place. Insert the plugs to the remaining door holes and
replace the screw caps.
10. Remove the cover
(10)
from the bottom cover
(1)
and replace it to the grooves at the other side of the
bottom cover (1) (symmetrically with their original position). Direct the holder (see the figure) of the
bottom cover (1) to the holes and push it in to fixate it fully.