EN - 15
10/2014
Copyright © 2014, Fast ČR, a. s.
PART 4: CONTROLS
The control panel that controls the temperature inside the freezer compartment is located inside the freezer.
SUPER FREEZE (Button)
If you need the temperature inside the freezer to drop quickly, please press this button and indicator of super
will be on. The unit runs in
Super Freezer
.
If you need the appliance to quit the mode of
Super Freeze
, please repress the Super Freeze (button), the
indicator of super shuts off .
ATTENTION!
The freezer will automatically quit the super freeze mode after 48 hours and the "super" indicator will
shut off simultaneously.
ALARM FOR FREEZER
If the power of appliance has been cut for a long time or stopped for any reason ,and the inside temperature
has reached the higher degree (≥-10°C)then it in working.
When temperature ≥-10°C,The indicator light begins to fl ash, and at the same time, the alarm sounds 3 times
per 10 seconds. After 2 minutes, the alarm will automatically stop, and the Excessive temperature indicator will
be on but will stop fl ashing. When temperature < -10°C, Excessive temperature indicator shuts off .
(button)
During the alarm of freezer, press
to stop the alarm sound, and the excessive temperature indicator is on
but not fl ashing.
Temperature regulation
Setting Cold means:
Highest temperature, warmest setting.
Setting Colder means:
Lowest temperature, coldest setting.
Caution for turning!
Please avoid turning the knob exeeding the position from "Cold" to "Colder".
IMPORTANT!
Normally we advise you select setting of Mid, if you want the temperature warmer or colder please turn
the knob to lower or higher setting accordingly. When you turn the knob to lower which can lead to the
more energy-saving. Otherwise, it would result the high energy-consuming.
IMPORTANT!
High ambient temperatures (e.g. on hot summer days) and a cold setting on the temperature regulator
(position Colder) can cause the compressor to run continuously or even non-stop!
Reason: when the ambient temperature is high, the compressor must run continuously to maintain the
low temperature in the appliance.
