Philco PDR 1592 BIT, User Manual

Page: 11 / 108

EN - 9
05/2013 Copyright © 2013, Fast ČR, a. s.
Draining water

Connect the drain hose. The drain hose must be properly attached so that water does not leak. Check that
the hose is not knotted up or pinched.
Extending the hose

If you need to extend the drain hose, you must use the same type of drain hose.

The hose must not be longer than 4 meters. Otherwise the effi ciency of the dishwasher would be reduced.
Connecting the drain hose
You must connect the drain hose at a height from 50 cm (minimum) to 110 cm (maximum) from the bottom
part of the appliance. Secure the drain hose using a clamp. The loose end must not be submerged in water.
Turning on the dishwasher
Before turning on the dishwasher, check the recommendation below.

The dishwasher is levelled and properly seated.

Is the inlet valve opened?

Joints do not leak in the connection points.

Cables are properly connected.

Is the power source turned on?

The water supply hose and the drain hose are not knotted up.

You have removed all packaging material and all printed materials.