EN - 30
06/2013
Copyright © 2013, Fast ČR, a. s.
Settings menu (Setting)
To enter the settings menu, press and hold the additional function selection button and the delayed start
button for approx. 3 seconds. The message "Keep pressing...X" (Keep pressing for ...X) will appear on the
display, indicating how much longer it is necessary to keep pressing the buttons. When the number on the
display reaches 0, the settings menu will appear. Navigate in the menu using the up/down buttons. To exit the
menu, either press and hold the additional function selection button and the delayed start button for approx.
3 seconds, or select the last option in the settings menu "Exit" and confi rm with the confi rm button.
Items in the menu:
1. Language (Language)
2. Water hardness (Water Hardness)
3. Volume (Volume)
4. Brightness
(Brightness)
5. Ecological mode (Ecomode)
6. Factory settings (Factory Settings)
7. Exit from menu (Exit menu)
1. Language (Language)
After entering the menu, use the up/down buttons to select "1. Language". The display will show: "1.Language:
X", where "X" is the name of the language. Then press the confi rm button to select a language. When
it is selected press the confi rm button again.
Several languages are available depending on the model.
2. Water hardness (Water Hardness)
See previous chapter of the manual.
3. Volume (Volume)
Set the button volume from the lowest level (L1) to the highest level (L3). After entering the menu, use the
up/down buttons to select "3. Volume". The display will show: "Volume: X", where "X" is the volume level – L1
(lowest), L2 (medium), L3 (highest). Press the confi rm button, set the value and press the confi rm button again.
4. Brightness (Brightness)
Set the brightness of the display. After entering the menu, use the up/down buttons to select "4. Brightness".
The display will show: "Brightness: X", where "X" is the set brightness of the display – L1 (lowest), L2 (medium),
L3 (highest). Press the confi rm button, set the value and press the confi rm button again.
5. Ecological mode (Ecomode)
This mode reduces power consumption by the display being turned off after 30 seconds of inactivity. After
entering the menu, use the up/down buttons to select "5. Ecomode". The display will show: "Ecomode: X",
where "X" is either YES (YES) or NO (NO). Press the confi rm button to change the value.
