EN - 40
01/2016
Copyright © 2016, Fast ČR, a. s.
Unsatisfactory
washing
results
Problem
Possible causes
What to do
The dishes are
not clean
The dishes were not
loaded correctly.
See notes in “Loading the Dishwasher Baskets “.
The programme
was not powerful
enough.
Select a more intensive programme.
See” Wash Cycle Table “.
Not enough
detergent was
dispensed.
Use more detergent, or change your detergent.
Items are blocking
the path of spray
arms.
Rearrange the items so that the spray can rotate
freely.
The fi lter
combination in the
base of wash cabinet
is not clean or is
not correctly fi tted.
This may cause the
spray arm jets to get
blocked.
Clean and/or fi t the fi lter combination correctly.
Clean the sp ay arm jets. See “Cleaning the Spray
Arms”.
Cloudiness on
glassware
Combination of soft
water and too much
detergent.
Use less detergent if you have soft water and select
a shortest cycle to wash the glassware and to get
them clean.
Black or gray
marks on
dishes
Aluminum utensils
have rubbed
against dishes.
Use a mild abrasive cleaner to eliminate those marks.
Detergent left
in dispenser
cups
Dishes block
detergent cups.
Re-loading the dishes properly.
Unsatisfactory
drying results
The dishes are
not dried.
Improper loading
Load the dishwasher as suggested in the directions.
Too little rinse-aid
Increase the amount of rinse-aid/refi ll the rinse-aid
dispenser.
Dishes are removed
too soon
Do not empty your dishwasher immediately after
washing. Open the door slightly so that the steam
can escape. Begin unloading the dishwasher only
once the dishes are barely warm to the touch.
Empty the low basket fi rst. This prevents water form
dropping off
dishes in the upper basket.
Wrong program has
been selected
In short program the washing temperature is lower.
This also lowers cleaning performance. Choose
a program with a long washing time
Use of cutlery
with a low-quality
coating
Water drainage is more diffi
cult with these items.
Cutlery or dishes of this type are not suitable for
washing in the dishwasher.
