background image

Installation of the water inlet hose

1. Check the tap mouth.  If it is not even, it can be filed even.

2. Screw loose  the locking ring, but do not let the locking ring drop off.  Screw the four screws at the same 

    distance.

3. Put the universal connector into the tap and stick to the tap mouth at the most and then screw in the screws.

4. Screw tight the locking ring to the right.

5. Pull the skirt of one end of the water inlet hose downwards, and then plug in the universal connector. A sound of

    "

6. Grasp the water inlet hose by hand and pull it downward to see whether it is secured

7. Screw the nut on the other end of the water inlet hose into the water inlet of the washing machine to the most.

KA-TA" means proper connection.

Tap

File

If the calibre of the tap 
is big, the connecting 
ring can be taken off.

Connecting ring

Locking ring

Skirt

Notices:

After installation, do not start the washing machine in haste.  First open the tap to let the water press into 

the water inlet hose to check whether there is any leakage in the connectors on the both ends.  Sometimes it is 

difficult to fix the water inlet hose due to the problem of the tap, you can ask an experienced man for help or 

contact the local customer service department.  When the pressure is too high, please shut the tap a little to avoid 

water leakage.

14

INSTALLATION

Installation of the drain hose

Nip the fixing ring with hand to make it loose and engaged on the drain hose and put the drain hose into the 

leading skirt of drain hose in the bottom of the washing machine to the end at the most (soak the head of the drain 

hose in warm water, it will make the engagement easy), and loose the fixing ring to let it clasp the drain hose.

Cabinet

Fixing ring  

Leading ring

Drain hose

Inner hose

INSTALLATION

         It had better put the outlet of the drain hose into the 

nearby drainage permanently, which can save the trouble 

that the drain hose has to be connected each time before 

use.  If the drainage is far from the washing machine, it 

can be solved by connection of the drain hoses head with 

end to extend.

Notices: 

drain faults will be caused when the drain hose is blocked or after the extension of the hose, it is above the 

water outlet.

Summary of Contents for GJW55P











Reviews: