OPERATING
NORMAL FUNCTION
1. Be sure to switch off the power and to connect to corresponding input jacks.
2. Turn on the power and wait 3-4 seconds until the speaker functions are connected.
3. Select an audio source by pressing the INPUT A key on the front panel to display AUX A, BT-A,
FM, USB A. Press the INPUT B key on the front panel to display LINE,USB B.
4. Adjust the VOLUME/MULTI knob on the front panel or the VOL+/- key on the remote control to
adjust the setting of the main volume,
. Then turn the left push shot to adjust the
treble, bass
volume of INPUT A, turn the right push shot to change the volume of the INPUT B.
5. Press the MENU key on the front panel to display BASS, TREBLE, XDRIVE,AUTO, MAIN then
adjust the VOLUME knob to change music treble,bass,light mode and sound effect.
6. PHONES OUTPUT selection. Press the PHONES MODEL button on the front panel to display
INPUT A, INPUT B, or INPUT AB.
PHONES VOLUME adjustment. Press the PHONES MODEL button on the front panel to display
INPUT A or INPUT B or INPUT AB, then rotate the VOLUME/MULTI knob to adjust the PHONES
VOLUME of INPUT A or INPUT B or INPUT AB
7. Press the LIGHT button on the remote control or press the MENU button on the front panel to
display light mode,then press the VOLUME/MULTI knob to change the OFF,R,G,B,RG,RB,GB,
RGB, AUTO,DEMO light mode.
8. Press the MUTE key to mute, press it again to reset.
Press X DRIVE on the remote to turn on/off X-Bass effect.
LIGHT COLOR CONTROL FUNCTION
To control the light mode coming from the speaker panels by "Speaker" menu or "light model"
button on remote control
R = red lights flash
●
G = green lights flash
●
B = blue lights flash
●
RG = red and green lights flash
●
RB = red and blue lights flash
●
GB = green and blue lights flash
●
RGB = red, green, and blue lights flash
●
Auto = the various color combinations cycle through and flash.
●
Demo = lights flash and change color as if they were responding to the beat of the music.
●
TUNER APPLICATIONS
1. Before using the radio functions, you must attach the supplied antenna. Adjust the antenna to
obtain optimum reception.
Press the INPUT A key on the front panel(amplifier)or the FM key on the remote control,to select
Fm function.
2. Press the CH+/CH- key on the remote control to find radio bands that you have previously saved .
3. Press or hold the TU+/TU- key on the remote control to adjust the radio frequency manually.
4. Press the AUTO key on the remote control, the machine will scan radio channels from
low-frequency to high-frequency by itself and memorize the channels one by one.
6
