Installation in the vehicle
3.1 Installation in vehicle for
children up to 13kg
• Place the child's car seat on a passenger seat with
a 3 point seat belt. Make sure the child seat is facing
towards the front of the car.
• Pull the lap and diagonal sections of the car seat until
fully extended.
• Guide the seat belt around the side panel of the car
seat making sure that the lap belt is below the arm
rest of the seat base (3-A). Then feed both lap and
diagonal belt into the side slot, around the plastic
back panel (over the harness) and back through the
opposite slot (3-B).
• Pull the belt around the seat and fasten in the normal way
making sure that the lap section is below the arm rest and
the diagonal section goes through
the red guide. (3-C)
• Make sure that there are no kinks or twists in the car
seat belt. To check that seat is fixed securely, tug the
top of the shoulder straps there should be little or no
forwards movement (3-D).
• Slide buckle tongue sections together and insert
them in the buckle with an audible “ click” (3-E).
• Pull gently on the harness adjuster to take up any
slack (3-F).
3-A
3-D
3-B
3-F
3-C
3-E
