BACK PANEL DESCRIPTION
23. GROUND LIFT SWITCH
This allows the grounding of balanced out socket to be disconnected. This is
useful if you are experiencing hum caused by grounding loops/problems.
24. BALANCED LINE OUT
This is an ultra-low impedance (200) balanced line out for use with recording
or PA mixing consoles. This output is not controlled by the volume control.
Changing the level on your instrument will however, vary the DI output.
25. AC INPUT SOCKET & FUSE.
Connects the amplifier to AC power supply. Always use a grounded plug and
make sure the AC cable is more than 3A rating at 250-volt AC. If you require a
longer AC power cord, we recommend the PJB heavy-duty 20 foot power cords.
These are available as an accessory. If fuse needs replacing, use a slow blow ¾
inch fuse.
26. POWER ON/OFF SWITCH
This switches the main power on and off in the amplifier. When you turn on the
power, it will have about 2 seconds delay to protect the speaker.
Do not leave the amplifier plugged into a power source for long periods of time
when not in use.
27. LINE OUT
Can be used for driving a second amplifier.
28. TUNER OUT
Connect to instrument tuner. This output can also be used as an additional
line out.
-6-