background image

traveller

6

WARNING

Do not use more than one mattress  
in the cot.

Before using the traveller, ensure all 
locking mechanisms are engaged. 
Check carefully that they are all fully 
engaged before use. 

If you leave the child unattended in 
the traveller, always make sure the 
side access panel is closed and 
secure. 

Ensure that all components of the 
frame are regularly checked for a 
secure fit. 

To prevent injury from falls, do not 
use the traveller when the child is 
able to climb out of the cot. 

NOTE: The distance between the 
surface of the mattress and the 
upper part of the framework of the 
cot must be at least 500mm.

WARNINGS

European Safety Standard 
(EN716-1:2008) and French Safety 
Standard (XPS 54-081) states:  

WARNING

Be aware of the risk of open fire and 
other sources of strong heat, such as 
electric bar fires, gas fires, etc. in the 
vicinity of the cot.

WARNING

Do not use the cot if any part is  
broken, torn or missing and use  
only spare parts approved by the 
manufacturer.

WARNING

Do not leave anything in the cot  
or place the cot close to another  
product, which could provide a  
foothold or present a danger of  
suffocation or strangulation,  
e.g. strings, blind/curtain rods, etc.

ATTENTION

ATTENTION

ATTENTION

ATTENTION

ATTENTION

Summary of Contents for Traveller










Reviews: