User Manual_POE60S-4AF
Power over Ethernet Midspan
POE60S-4AF User Manual
BERGER Stromversorgungen GmbH & Co. KG
Am Eiskellerwald 22
77855 Achern
Germany
www.berger-stromversorgungen.de
Tel.: +49 (0)7841-67304-0
Fax: +49 (0)7841-67304-29
FAQ
What are the benefi ts to using PoE?
Power over Ethernet is best suited to users who want
to expand and extend the capabilities of their existing
network switches. PoE uses standard Category 5e
or 6 cables and uses them to transfer both data and
power to remote locations. Since extensive wiring
is not needed, these remote locations are able to
be easily changed. PoE power standards are also
universal. Unlike traditional power supplies which
are only compatible with specifi c standards to their
region, PoE is able to self regulate to work with a
variety of international power standards. PoE also
offers more fl exibility in power events, such as a surge
or brownout.
Why am I limited to 100 meters?
Power can be transmitted over an Ethernet cable
to distances that exceed 100 meters depending on
the amount of power being put out by the midspan
and loss on the cable across the distance. If the port
powering the Ethernet puts out 15.4W (IEEE802.3af
standard) of power and the distance is 100 meters
then the power could dissipate to 12.95W in the worst
case scenario by the time it reaches the end device.
PoE is possible over distances greater than 100
meters but is not not guaranteed or recommended
as the IEEE specifi cation guarantees only 100 meters
for data transmission. Should a distance exceed
100 meters or more then an Ethernet extender such
as Phihong’s POE60S-4AF or POE61S-4AF are
recommended. Although power is possible at greater
distances, users may experience severe data loss
after traveling 100 meters or more.
Will I be able to use this device with my midspan
that has an output of 15.4 or 30W per port?
No. In order for this device to operate the user must
be using an Ultra or Mega PoE power injector or
equivalent. Because this device detects an internal
signature resistance of 12.5K, if it does not detect an
output of 75W or better then it will not work. Phihong has
developed several Ultra and Mega PoE midspans and
single port power injectors that put out at full power 75-
95W per port which is ideal for the POE60S-4AF to
be fully functional. The POE60S-4AF has an optional
75W DC input with Phihong’s PSC75U-560 in the
event that 75W PoE is unavailable. This option does
however require that AC power be readily available
to the Desktop Adapter so that it may power the
POE60S-4AF.
Do I need a special confi guration for my network?
No, the POE60S-4AF is set to DHCP and will obtain
an IP address automatically from the network. It
should not affect any existing network applications.
The device acts as an extender and switch only. The
data and power will enter the device and be relayed on
to the powered devices. There should be no change
as if it were one continuous cable. Phihong does
recommend professional installation to ensure that
should any faults occur at installation, a technician is
on hand to handle any problems should they arise.
Where should I install my PoE Extender?
Your new PoE extender can be installed anywhere
between the midspan or power injector and the device
that needs powering provided that the extender’s
input and output connecting cables do not exceed the
100 meter limit. The device can be surface mounted
including walls, tables and in select environments to
a ceiling, but under no circumstances may the device
use the connecting Ethernet cables as support.
