150Mbps Wireless N Router
www.phicomm.com
3
Chapter 1: Introduction
ON/OFF:
The power on/off button.
Power:
The Power port connects to the included power adapter.
LAN (1~4):
Using Ethernet cables, these Ethernet ports (4, 3, 2, 1) connect the Router to
computers and other Ethernet network devices on your wired network.
WAN:
Using an Ethernet cable (also called a network or Internet cable), the Internet port
connects the Router to your Internet connection, which is typically a cable or Digital Subscriber
Line (DSL) modem.
WPS:
Press the button and the WPS LED in front panel flashing, WPS function is enabled.
Reset:
Long press and hold the button for 8 seconds, the Router will reboot to its factory default
settings.
Rear Panel
