ENERGY SAVING AND EMISSION REDUCED
You can set up a schedule and keep your wireless network if
necessary switched on and off automatically according to your
personal needs. You can also reduce or increase the performance
of the network as needed.
1. Select „Health and Power Saving“ in the menu.
COMMENT:
For proper work of this function, please take care, that system time
and local time are matching.
2. Open „Time Setting" (default: enabled)
Please note that this will have impacts on performance and range of
the wireless signal.
3. Set the time range including days and hours and click „Save“.
TROUBLESHOOTING
Why I cannot open the website for setting up my router?
•
If necessary, turn off the Proxy-settings of your browser.
•
Take care, that the network obtains the IP-address automatically.
•
Take care, that the LAN- and WLAN-LED are lighting and that all
cables are connected properly.
I forgot the name of my network and / or the network security
key!
Press the WPS-button of the router more than 5 seconds to reset to
factory settings.
FACTORY DEFAULT SETTINGS
Username / password
admin/admin
IP-address
http://192.168.2.1 / http://phicomm.me
Why I cannot open the internet via wireless LAN-adapter?
•
Move the router closer to the wireless client.
•
Check if the wireless adapter is connected with the right
WLAN-router.
•
Check if the used radio channel complies with the available
channels in the country / region.
•
Try to connect with another Ethernet-cable again.
•
Check if all cable-connections are proper.
FCC STATEMENT
This device has been tested and complies with Part 15 of the FCC
Rules for Class B. These regulations are intended to protect against
adverse effects of device operation in a home environment.
The operation of a device under FCC regulations Part 15 is subject
to the following two conditions:
•
The device may not cause harmful interference.
•
This device must accept any interference, including all those that
cause undesirable behavior.
This router generates and uses radio signals and therefore may
interfere with radio communications if not installed. However, there
can be no guarantee that interference will not occur. If a
communication fault can occur, which can be tested by simply
switching off and on the device, you should perform the following
actions:
•
Realign antennas
•
Increase distance of the router to radio or television
•
Use router with a different circuit than the radio or TV operate
•
Contact dealer or manufacturer
Any use not expressly approved by PHICOMM changes to the
device will invalidate the guarantee.
This equipment complies with the FCC RF radiation exposure limits
set forth for an uncontrolled environment. This router and its
antenna / antennas must not be operated in the immediate vicinity
of other radio wave emitting devices / antennas. The antennas used
for this router must be at least 20 cm away from people.
