ADSL2/2+ Modem Router
www.phicomm.com
41
Chapter 4: Software Configuration
Administration
Note:
There is only one account that can access web management interface. The default
account is admin, and the password is admin. Admin has read/write access privilege.
When you change the password, you should enter the new password twice, and then
click SAVE to make the new password take effect.
Time Zone
The system time is the time used by the device for scheduling services. There are three methods
to configure the time. You can manually set the time, specify the PC’s Clock as the device’s
system time or connect to a NTP (Network Time Protocol) server. If you manually set the time,
you may also set Daylight Saving dates and the system time will automatically adjust to those
dates. If a NTP server is set, you will only need to set the time zone. If PC’s Clock is selected, the
device will get the PC’s Clock by way of the system time.
NTP Server automatically
Select NTP Server automatically as the synchronize time, you only need to set the time zone.
Note: The ADSL Router built-in some NTP Servers, when the Router connects to the Internet, the
Router will get the system time automatically from the NTP Server. You can also configure the
