pilot box
A
B
Figure 6
Figure 7
1. Make sure the valve connections are securely fastened to the burner and the cylinder.
2. Visually check the connection between the burner/venturi tube and orifice.
3. Make sure the burner/venturi tube fits over the orifice.
4. Please refer to diagram for proper installation (See Figure 7).
5. If the burner/venturi tube does not rest flush to the orifice as shown, please contact us
for assistance.
Burner connections
7. Place the glass beads (B) into the fire pit body (A). Approx 2.2 lbs of glass beads are needed (See Figure 6) .
1.
2.
ASSEMBLY INSTRUCTIONS
8
NOTE:
Leave the pilot box uncovered by glass beads.
WARNING
Keep children away during assembly, as this item contains glass beads, which are small pieces and can be swallowed
by children.
WARNING
Before using this outdoor firepit, make sure you have read, understand and are following all information provided in
the “Safety Information” section beginning on page 2 and 3. Failure to follow those instructions can cause death,
serious injury or property damage.
OPERATING INSTRUCTIONS
Checking for leaks
LIFE GETS BETTER WITH PHI VILLA
