PHI VILLA AH-FP-40FH Instruction Manual Download Page 13

Page: 13 / 13

Press up or down button to the desired temperature. When desired ambient

temperature is reached, the heater will automatically stop heating. When the

ambient temperature drops below the desired temperature 2°C, the heater will resume

heating.

Remote Control Battery Replacement:

Replace with a CR2025 battery and follow the diagram at the back of remote handset to install the
new battery.

Maintenance:

WARNING:

Completely disconnect power before attempting any maintenance or cleaning, to

reduce the risk of fire or electric shock.
Maintenance should only be performed by a certified technician.

Cleaning:

Before cleaning any parts of the fireplace make sure to first turn off the controls and then
unplug the unit from power source.

CAUTION:

Wait until the unit has completely cooled before attempting any cleaning.

Cleaning Glass Panel

: Remove dust with clean dry cloth. Remove fingerprints and other

marks from glass door by using a clean damp cloth. Do not use abrasive cleaners or spray
liquids on glass door surfaces.

Metal and metal painted parts should be cleaned with clean damp cloth only.
Do not use abrasive cleaners or spray liquids on these surfaces.

Summary of Contents for AH-FP-40FH







