17
PM1A
Low Resistance / Continuity
To measure low resistance / continuity
:
4-
Connect the test leads to the circuit to be measured. The display will show the resistance value. If the
unit detects a short-
circuit or the reading is R < 5 Ω ± 0,5 Ω, the equipment will indicate with a BEEP
(intermittent sound
).
Note:
This function does not compensate values higher than 5 Ω.
Press the key .
Make a short circuit with the test
leads. The resistance value of the
test leads will appear in the display
.
(0,25 Ω)
Display indicates
.00
.
