INSTALLATION
WWW.PHENIXLIGHTING.COM
2/4
OUTSIDE THE LUMINAIRE
INSIDE THE LUMINAIRE
184
601
/2
LED test switch
CAUTION: MAKE CERTAIN THE AC POWER IS OFF AND THE 184601/2 UNIT CONNECTOR IS
DISCONNECTED UNTIL THE INSTALLATION IS COMPLETE.
1. SPECIFICATION OF 184601/2
2. INSTALLING THE 184601/2
The 184601/2 can be mounted inside or outside (nearby or on top of) the luminaire.
3. INSTALLING THE LED TEST SWITCH (LTS)
Select a convenient location for the LTS so that it can be seen after installation.
Drill a 1/2"(12 mm) hole for mounting the LTS. Connect the wires from LTS to the
184601/2 model according to the wiring diagram on page 3.
All dimensions are typical
OUTSIDE THE LUMINAIRE
1846
01/2
One 7/8" (22mm) hole for
conduit connector for 184601/2
184601
184602
Output
Output power
Voltage
Input
230V/50Hz
120V/60Hz
100W
200W
230V/50Hz
120V/60Hz
277V/60Hz
277V/60Hz
