SERIES GRF GRIPPERS SWITCH KITS & INSTALLATION
6441-485D
www.phdinc.com • [email protected] • 1-800-624-8511
GRIPPER SIZE
19
SWITCH MOUNTING KIT
73722-19
6 mm SQUARE PROXIMITY SWITCH
MOUNTING KITS
6 mm SQUARE PROXIMITY
SWITCH TARGET
(ORIENT AS SHOWN)
TARGET MOUNTING
SET SCREW
SOCKET HEAD CAP
SCREW FOR SWITCH
BRACKETS
6 mm SQUARE MAGNETIC
SWITCH TARGET
(ORIENT AS SHOWN)
6 mm SQUARE
SWITCH BRACKET
6 mm SQUARE SWITCH
ORIENT AS SHOWN IN
BRACKET (SWITCHES
NOT INCLUDED IN KIT)
GRIPPER SIZE
19
SWITCH MOUNTING KIT
73723-19
6 mm SQUARE MAGNETIC SWITCH
MOUNTING KITS
KIT INCLUDES: 2 Brackets for 6 mm Switch
2 Socket Head Cap Screws for Bracket
1 Target (Proximity or Magnetic)
1 Set Screw for Target Mounting
CU TARGET PIN
6 mm SQUARE HALL EFFECT OR PROXIMITY
SWITCH MOUNTING REQUIRES -CU OPTION
GRF SIZE 19
INSTALLING & ADJUSTING 6 mm SQUARE PROXIMITY AND HALL
EFFECT SWITCHES. DO NOT EXCEED RECOMMENDED TORQUE
SPECIFICATIONS.
1) Apply removable threadlocker to target mounting set screw,
loosely install in target.
2) Place target on -CU target pin oriented as shown.
3) Tighten target mounting set screw to the recommended torque
specification. (see Table 1)
4) Apply removable threadlocker to bracket mounting socket head
cap screws and loosely install in brackets.
5) Loosely install socket head cap screw and bracket into body of
gripper oriented as shown.
6) Slide 6 mm switch between bracket and slot in body.
7) Adjust distance between switch and target so switch trips
properly. Tighten switch bracket socket head cap screw to hold
switch in place.
8) Adjust on/off position of switch per your requirements.
9) Tighten switch bracket socket head cap screws to recommended
torque specification. (see Table 1)
10) Repeat steps 4 through 9 for other switch.
PROXIMITY SWITCH MOUNTING
REQUIRES -CU OPTION
GRF SIZE 25, 28, & 32
INSTALLING & ADJUSTING 4 mm PROXIMITY SWITCH. DO NOT EXCEED RECOMMENDED
TORQUE SPECIFICATIONS.
1) Apply removable threadlocker to target mounting set screw, loosely install in target.
2) Place target on -CU target pin oriented as shown. (see Figure 1)
3) Tighten target mounting set screw to the recommended torque specification. (see Table 1)
4) Apply removable threadlocker to SHCS and set screw.
5) Loosely install SHCS and set screw in proximity switch bracket.
6) Insert switch into switch bracket assembly as shown and lightly tighten
SHCS to hold switch in place.
7) Slide switch bracket assembly with switch into slot in body.
8) Adjust distance between switch and target so switch trips properly.
Tighten SHCS to recommended torque specification. (see Table 1)
9) Adjust on/off position of switch per your requirements.
10) Tighten switch set screw to recommended torque specification.
(see Table 1)
GRIPPER SIZE
25
28
32
SWITCH MOUNTING KIT
73722-25
73722-28
73722-32
4 mm PROXIMITY SWITCH MOUNTING KITS
KIT INCLUDES: 2 Brackets for 4 mm Switch
2 SHCS for Bracket
2 Set Screws for Bracket
1 Target
1 Set Screw for Target Mounting
TARGET MOUNTING
SET SCREW
TARGET
(ORIENT AS SHOWN)
-CU TARGET PIN
PROXIMITY SWITCH
BRACKET
SWITCH CLAMP SCREW
(CLAMP SWITCH)
SWITCH BRACKET MOUNTING SET SCREW
(LOCKS BRACKET IN SLOT)
4 mm PROXIMITY SWITCH
ORIENT AS SHOWN IN BRACKET
(SWITCH NOT INCLUDED)