1
1
1. INTRODUCTION
The HDBaseT™ 4 by 4 or 8 by 8 HDMI Matrix over CAT5e/6/7 supports
the transmission of video (resolutions up to 1080p Full HD and
1920x1200@60Hz), multi-channel digital audio and control via IR, RS-
232, Telnet or Web GUI from four or eight high defi nition sources to
four or eight outputs over a single CAT5e/6/7 cable (up to 100m) for
each output.It supports high resolution digital audio formats such
as LPCM 7.1CH, Dolby TrueHD, Dolby Digital Plus and DTS-HD Master
Audio as well as 3D content that can be displayed when connecting
a 3DTV and 3D source. Power over Ethernet (PoE) support means that
compatible receivers do not need their own power supplies, allowing
for greater fl exibility in installations.
2. APPLICATIONS
•
HDMI Matrix System
• Video/TV wall display and control
• Security surveillance and control
• Commercial advertising, display and control
• University lecture hall, display and control
• Retail sales and demonstration
3. PACKAGE CONTENTS
•
HDBaseT™ 4×4/8×8 HDMI Matrix over CAT5e/6/7
•
2×IR Extender
• 2×IR Blaster
• 2×24 V/6.25 A DC Power Adaptor (1 for PoE)
• 1×IR Remote Control
• Operation Manual
2
4. SYSTEM REQUIREMENTS
• HDMI equipped source devices, connect with HDMI cables or DVI
equipped source, connect with DVI to HDMI cables
• HDMI equipped displays (TVs or monitors) or HDMI equipped AV
receivers, connect with HDMI cables
• Industry standard CAT5e/6/7 cables
• HDBaseT™ Receivers (i.e. CH-506RX, CH-507RX or CH-1109RX)
5. FEATURES
• HDMI, HDCP1.1 and DVI compliant
• Supports HDMI 3D features
• Supports resolutions VGA~WUXGA and 480i~1080p dependent upon
the output display’s EDID settings
• Supports 3D signal display dependent upon the output display EDID
settings
• Supports PoE (Power over Ethernet) on compatible receivers only
• Supports HDMI input up to 15 meters at 8-bit resolution or 10 meters
at 12-bit resolution
• Supports bi-directional IR from input and output locations
• Supports RS-232, remote control, on-panel control and IP Control
(Telnet & Web GUI)
•
2U size design
•
Supports external and internal EDID settings
• Supports LPCM 7.1CH, Dolby TrueHD, Dolby Digital Plus and DTS-HD
Master Audio transmission
Note:
1. The PoE function is designed for powering compatible receiver units
only—non-PoE receivers will need their own power supply. Receivers
of another brand may not be compatible.
2. Do not connect the LAN/CONTROL port to CAT outputs of this
device.
