1. Introduction
3. Package Contents
• 1× EXC-DAE300-RX Receiver
• 1x EXC-DAE300-TX Transmitter
• 2x Surface mounting brackets
• 1× 5V/1A power supply
• 1× User manual
2. Features
• Extend optical and coaxial digital audio signals up to distances of 300m over
a single CAT cable
• Optical and coaxial digital signal can both be distributed at the same time
• Supports distances of up to 192kHz - 100m, 96kHz - 150m, 48kHz - 300m
• Active solution powered only at the receiver unit. The transmitter receives
power over the CAT cable.
• Built in DAC (Digital to Analog Converter) converts either optical or coaxial
digital (selectable) to analog stereo left/right audio output (PCM only)
• Supports sample rates 32 kHz, 44.1 kHz, 48 kHz, 96 kHz and 192 kHz up to
24-bit resolution
• Supports LPCM, DTS, Dolby Digital and Dolby Digital Plus when used as a
straight digital in/digital out extender
• Plug-and-play
• Small compact size
• Ultra-low jitter and high-fidelity design
EXC-DAE300-KIT
USER MANUAL
www.phdsolutions.co
3
The PhD Solutions EXC-DAE300-KIT digital audio over Cat extender-convertor
solution transmits digital optical and coax signals concurrently up to a distance
of 300m@48kHz, 150m@96kHz or 100m@192kHZ. The receiver side DAC
converts either of the digital ( coax/toslink optical) signals to a 2Ch analog
stereo audio output. The receiver will power the transmitter over the CAT cable.
This is a fantastic plug and play solution for sending optical audio from an
HDTV back to an amplifier, AVR or multiroom audio system which requires an
analog stereo audio input signal.
