FC-1T-1VAC
2 / 4
14741000
1.
Set the
voltage switch
to the correct position for the line voltage used, 120 or 230 VAC.
2.
Position the
jumper
for the mode you want to use, automatic shut-off or idle mode.
3.
Connect the wires as shown in the diagram.
Automatic shut-off mode
1.
Turn the
Temperature
knob to the point where the fan turns on.
2.
Turn the
Idle Speed
knob to the minimum idle speed desired.
3.
Turn the
Temperature
knob to the desired temperature.
Idle mode
1.
Turn the
Temperature
knob fully clockwise.
2.
Turn the
Idle Speed
knob to the minimum fan speed desired.
3.
Turn the
Temperature
knob to the desired temperature.
