Section 3
Mounting and Unmounting the Camera Back
The camera back fits to your camera just like a normal film cassette. Use
the following procedures to mount and unmount the camera back:
Section 3.1
Mounting the Camera Back
1. Set your film mounting assembly in the portrait (for pictures that are
taller than they are wide) or landscape (for pictures that are wider
than they are tall) position.
2. Pull back the focusing screen release lever on your camera to make
room to slide the camera back into place in front of the screen.
3. Gently slide the camera back into place until it will slide no further.
4. Return your camera's focusing screen release lever to the closed posi-
tion to hold the camera back in place.
5. Slide the camera back's dust cover all the way up to fully expose the
scan area.
6. Be sure to install a Phase One infrared filter on your camera before
using the camera back.
Section 3.2
Unmounting the Camera Back
1. Slide the dust cover all the way down to protect the scan area.
2. Securely grasp the camera back by its rubber grip
3. Pull back the focusing screen release lever on your camera to make
room to slide the camera back away from your camera.
4. Pull the camera back up and away from the camera.
Studiokit Digital Camera Back for Large Format Cameras – User's Guide
7
Summary of Contents for Studiokit
Page 2: ......
