PhaseOne P 20, Reference Manual

Page: 67 / 108

P - Series Reference Manual
67
Hasselblad 501 CM and 503 CW without winder
The Phase One P back also supports mechanical
Hasselblad cameras such as the 501 CM and 503 CW.
These cameras are operated in single shot mode via
the shutter release button or a standard cable release.
Please note that the Phase One P back should not be
mounted while the camera is set to mirror up.
Also make sure that the lens is not jammed or locked
open on the “B” setting when connecting the flash
sync cable to the Phase One P back.
If you are using a mechanical Hasselblad you should
normally set the Shutter latency to ”Short latency”
It is possible to use ”Long latency” mode on Mechani-
cal cameras, but precautions must be taken not to
trigger too fast.
To ensure capture reliability, we recommend that you
look at the green LED on the back of the camera back
while you slowly press the mechanical trigger on the
camera body.
You can safely press the button all the way in the mo-
ment the LED flashes.
”Mirror Up” is not supported when using "Long La-
tency".