10
9
Step 2: Configuring the UAV
for Communication with the
Phase One Camera System
1. Download DJI Assistant 2 from the DJI website and install
it on a PC.
2. Connect a USB cable between the PC and the UAV micro
USB port.
3. Turn ON the drone.
4. Start the Assistant 2 application.
The following screen is displayed when the UAV is connected.
5. Click the
M600
icon. The following screen appears.
6. In the tree menu click 'SDK'. The following screen appears.
7. Configure the following fields:
• Select the 'Enable API Control' check box
• Select the 'Ground Station Status' check box
• Set the 'Baud Rate' to 115200
8. Exit the application.
9. Re-start the UAV in order for the changes to take effect.
Note:
This procedure should be repeated if DJI UAV
Firmware was upgraded.
