Phase One iXG Camera
Sensor Cleaning Procedure
3
Introduction
This procedure shows how to clean the sensor on iXG camera.
The procedure is done in four steps:
1.
Removing the lens
2.
Cleaning the camera interior and sensor module
3.
Reassembling the camera body
4.
Mounting the lens
Required tools
Before you start, make sure that you have the following:
•
A clean, dry place to perform the service
•
Hex #2.5mm screwdriver
Torque handle set to 70cNm
2.5mm x 100mm Hex head bit
•
Phase One cleaning kit
